Meadow Dance Blog Hop: Day 3

Get ready for more Meadow Dance inspiration! We've seen what Amanda Murphy has created with her new fabrics (click here if you missed it), and now it's time for some more fun! This week we'll be featuring four different projects using the gorgeous Meadow Dance florals and coordinates. Enjoy the tutorials, and make sure to enter to win a fat quarter bundle!

Today Sandra from mmm! quilts is here to share her quilt design, Ribbon Stars. Enjoy her tutorial and then head over to her blog to enter to win a fat quarter bundle of Meadow Dance fabrics. 

Here's Sandra:
Hello everyone! I am Sandra of http://www.mmmquilts.com/.  I originally named my blog Musings of a Menopausal Melon, because I'd recently retired early from teaching, was just beginning menopause and was musing about that and the new direction my life was taking, and was also blogging about my quilting. I shortened it to mmm! quilts when I started to gain readership, and the focus became primarily on quilting with occasional diversions, 😉.  So now you know where mmm! comes from. I was super-excited to be asked to take part in this hop for Amanda Murphy's new line, Meadow Dance.

I have been a fan of her designs and her quilting for some time, and I own her book, Modern Holiday, but this is the first time I've worked with her fabric. And what a line!  Love! In fact, I could NOT decide on just a few of the fabrics, and so I got a bit of it all because the quilt I designed is perfect to show how the various prints work so beautifully together.  Here is the quilt, Ribbon Stars, on a farmer's fence, in a meadow!

In case you're thinking, gack! an entire quilt? Rest assured this baby goes together in no time at all because of a very intelligent (if I may say so) construction method that eliminates several seams. The quilt measures 42.5 X 45.5". 

Fabric needed (based on 43" of useable fabric width) 
Background: 1 yard 
Star points: 1/4 yard of each of two different fabrics (Note that the four cornerstones in the border will be cut from the remainder of one of these fabrics.) 
Centre ribbon blocks: a variety of prints to TOTAL 1/2 yard, OR if you prefer to do all the centres the same with four colours only, then a 1/4 yard of each colour will do it. 
Border:  1/2 yard 
Backing: 1 1/2 yards (This means your quilt will just fit across the width of the fabric; if you prefer to have extra allowance along the sides, you will have to piece the backing, so 2 yards will allow for this.) 
Batting: a piece that is approximately 45X50"

Cutting 

Background 

Cut 2 strips @ 7 1/4". Subcut into seven 7 1/4" squares. 
Cut 4 strips @ 3 1/2". Subcut into 12 rectangles 3 1/2 X 12 1/2" and four 3 1/2" squares. 
Cut 2 more 3 1/2" squares from the remainder of the 7 1/4" wide strips for a total of six 3 1/2" squares. 

Star points 
Cut 14 squares @ 3 7/8" of two different fabrics for a total of 28 squares. 

Centre ribbon blocks 
Scrappy look: cut a total of 48 rectangles @ 6 1/2 X 2" which will make 12 centre ribbon blocks. Matching: cut 12 rectangles @ 6 1/2 X 2" of each of four different prints to total 48 rectangles which will make 12 centre ribbon blocks. 

Borders 
Cut two border strips 3 1/2 X 36 1/2" (or the width of your quilt centre) and two strips 3 1/2 X 39 1/2" (or the length of your quilt centre) 
Cut four cornerstone squares @ 3 1/2" from the remainder of one of the star points fabrics.

Quilt centre pieces all cut! No borders cut yet; might be an idea to wait to check your quilt centre measurements before cutting yours.

Sewing

Star points 
Draw a diagonal line on each of the 3 7/8" squares. I like to use my Hera marker. Lay two squares of one colour across the diagonal of a 7 1/4" square as shown below, left. The 3 7/8" squares will overlap slightly in the centre. Sew a scant 1/4" on either side of the drawn line. Cut apart on the drawn line.

Press the seams to the 3 7/8" squares (turquoise in my case). The units look a bit like a heart shape. Now lay a 3 7/8" square of the second star point fabric atop the background fabric at the bottom point of the heart shape unit. Again, sew a scant 1/4" on either side of the drawn diagonal line.

Cut apart on the that drawn line. Press to the star point fabric. Trim to 3 1/2 X 6 1/2".  You will get two of each orientation as shown below. Make 28 of these flying geese units. (Note that the quilt requires 27, so you will have one extra.)

Centre blocks Sew four 6 1/2 X 2" rectangles together to form the centre ribbon block. Tip for scrappy: I separated my rectangles into basically cool and warm colours, and then paired them up. Then I sewed the pairs together. This controlled the scrappiness a bit, and evenly distributed the cool and warm colours as well as the prints. The block should measure 6 1/2" square.  Make 12.

Quilt Assembly

The quilt is constructed in columns, not blocks. Lay out the pieces on your design wall according to the diagram as shown below.

Sew the pieces for column 1: a 3 1/2" square, a flying geese unit, a 3 1/2 X 12 1/2" rectangle, another flying geese unit, followed by one more 3 1/2 X 12 1/2" rectangle. Press the seams toward the background fabric, away from the flying geese units, or open if you prefer. Place column 1 back on the design wall; you can label it column 1 if you wish with painter's tape or a numbered pin. 

Now piece column 2: a flying geese unit, a centre ribbon block oriented horizontally, a flying geese unit, a centre ribbon block oriented vertically, a flying geese unit, and so on, but press the seams toward the centre squares. This will ensure opposing seams nest. 

Continue in this manner until you have all 9 columns pieced. Now sew columns 1, 2, and 3 together, pressing the long seams outward. Set this unit back on the design wall.  Now sew columns 4, 5 and 6 together, and then 7, 8 and 9 together, pressing as before. You will have 3 larger columns now.

Finally, sew these three columns together to make the quilt centre. It should measure 36 1/2 X 39 1/2". Borders Sew a 39 1/2" border strip (or whatever length your quilt centre measures) to either side of the quilt. Press to the border fabric. Sew a cornerstone to each end of the two 36 1/2" border strips. Press to the border fabric (away from the cornerstones). Sew these units to the top and bottom of the quilt. Press.  Your quilt should measure 42 1/2 X 45 1/2".

Quilt, bind and enjoy!  I free-motion quilted wavy flowing lines across the quilt but switched to vertical wavy lines where the ribbon centre blocks were vertical. I did a simple dot to dot design in the cornerstones. In the floral border I did a piano key motif, but just with wavy lines, not sraight! It gives a wonderful texture to the quilt and quilts up in about an hour. I used Floral Blender Turquoise for the binding.

Here's the back. I love pieced backs that are fun and give the viewer a surprise. However, for this quilt, I'd intended to use my favourite print, Wildflowers in white/multi as the sole backing, but when I got the fabrics, I fell hard for this one and so I cobbled together leftovers from the centre ribbon blocks to allow me to have the half yard of fabric I saved grow up into a cushion aka pillow or maybe a bag. So I got my fun quilt back after all!

This quilt has so many possibilities. I've got a rainbow rendition on the go (it was my pattern testing quilt) that has the ribbon centre blocks all the same using some other Benartex fabrics. Check out my blog to take a peek. There you will find links to the other two quilts that I've made from my pattern, one multi-coloured like this one, the other all in blues, as well as a superb giveaway! 

Follow along on all four days of our Meadow Dance blog hop!
Tuesday: Alison @ Little Bunny Quilts
Wednesday: Benartex blog design team
Thursday: Sandra @ Mmm Quilts
Friday: Chris @ made by ChrissieD

Click here to see our original Meadow Dance post. 

Click here to see the entire Meadow Dance collection.

Click here to visit Amanda's website and find her patterns.

Love It? Share It!